歡迎光臨勝帆建材中文版 English |勝帆涂料        新浪微博 | 聯系勝帆| 網站地圖
專業的GRG/GRC/GRP生產基地
Professional GRG/GRC/GRP Production Base

  18022022451

核心產品

聯系勝帆

招聘咨詢:18022022451  

傳真:0760-88881448  

郵件:[email protected]  

微信訂閱號:

  

微信二維碼

GRG

您現在的位置是:勝帆首頁 >>核心產品 >>GRG

  • GRG簡介
  • GRG設計
  • GRG生產工藝
  • GRG安裝
  • 勝帆建材GRG介紹
    Shengfan building materials GRG introduction

     

    中文全稱:玻璃纖維增強石膏成型品
    英文名:Glass Fiber Reinforced Gypsum

    GRG 是玻璃纖維加強石膏板,它是一種特殊改良纖維石膏裝飾材料,造型的隨意性使其成為要求個性化建筑師的首選,它獨特的材料構成方式足以抵御外部環境造成的破損、變形和開裂。

    GRG is a glass fiber reinforced gypsum board, it is a special modified fiber gypsum decorative materials, the shape of the randomness of the requirements of individual architects to become the first choice, its unique material composition is sufficient to resist the external environment caused by damage, deformation and Cracked.




    GRG 產品是采用超細結晶石膏(改良的ɑ石膏)為基料與專用連續剛性的增強玻璃纖維、專用添加劑(符合國際添加劑要求)混合,在模具上經過特殊工藝層壓而成的預鑄式新型裝飾材料,在綜合性能上達到了國際質量標準。

    GRG products are ultra-fine crystalline gypsum (modified ɑ gypsum) as the base material and dedicated continuous rigid reinforced glass fiber, special additives (in line with international additives requirements) mixed in the mold through a special process of laminated pre-cast New decorative materials, in the overall performance reached the international quality standards.



    產品表面光潔平滑呈白色,材質表面光潔、細膩,白度達到 90%以上,并且可以和各種涂料及面飾材料良好地粘結,形成極佳的裝飾效果、環保安全不含任何有害元素。此種材料可制成各種平面板、各種功能型產品及各種藝術造型,是目前國際上建筑材料裝飾界最流行的更新換代產品。

    The surface of the product is smooth and smooth, the surface is smooth and delicate, and the whiteness is over 90%, and it can be well bonded with various kinds of paint and noodle material to form an excellent decorative effect. The environmental protection does not contain any harmful elements.?This material can be made into a variety of flat panels, a variety of functional products and a variety of artistic modeling, is currently the world's most popular building materials decoration industry replacement products.



    正常情況下,建筑設計師們經常會推薦應用在工商業建筑為抵抗高的沖擊而增加其穩定性的吊頂為主。此外,由于 GRG 材料的防水性能和良好的聲學性能,尤其適用于頻繁的清潔洗滌和聲音傳輸的地方,像學校、醫院、商場、劇院等場所。

    Under normal circumstances, architects are often recommended to use in industrial and commercial buildings to resist the impact of high impact and increase its stability of the main ceiling.In addition, due to GRG material waterproof performance and good acoustic performance, especially for frequent cleaning and sound transmission of the place,Like schools, hospitals, shopping malls, theaters and other places.



     

    GRG樣板
    GRG樣板圖
    GRG template map

    ------ 責任編輯:勝帆建材
    ------Editor: Sheng Fan building materials

    版權所有http://www.uvvfgi.live(勝帆建材)轉載請注明出處
    All rights reserved http://www.uvvfgi.live (Sheng Fan building materials) reproduced please indicate the source

  • GRG深化設計步驟
    GRG deepen the design steps
     

    GRG深化設計的步驟:
    1.熟悉建筑施工圖(了解技術參數及要求)
    2.在圖紙上把GRG產品部分標出
    3.對GRC進行分類/分區
    4.對各局部的GRC產品進行受力分析,從而決定產品的安裝方式
    5.繪制GRC產品安裝示意圖---CSD
    6.將圖紙會審,提出修改意見
    7.提交正式的CSD圖紙-----(用來表示產品安裝方式)
    8.確認通過后畫PSD(生產圖紙---用于車間單件產品的示意圖)
    9.設計總監審核簽字
    10.圖紙分發---文控部(進行蓋章)

    GRG Deepen the design steps:
    1. familiar with the construction drawings (to understand the technical parameters and requirements)
    2. Mark the GRG product section on the drawing
    3. Classification / partitioning GRC
    4. The local GRC products for force analysis, which determines the product installation
    5. Draw GRC product installation diagram --- CSD
    6. The drawings will be reviewed and made amendments
    7. Submit a formal CSD drawing ----- (used to indicate the product installation method)
    8. Confirm that after drawing PSD (production drawings --- for the workshop single product schematic)
    9. Design Director Review Signature
    10. Drawing distribution --- text control department (for sealing)

    ------ 責任編輯:勝帆建材
    ------Editor: Sheng Fan building materials

    版權所有http://www.uvvfgi.live(勝帆建材)轉載請注明出處
    All rights reserved http://www.uvvfgi.live (Sheng Fan building materials) reproduced please indicate the source

     

  • 勝帆GRG生產工藝
    Shengfan GRG production process
     

    GRG生產工藝流程主要有以下六大步:
    1.計算機編程
    2.雕刻機雕刻模具
    3.模具的組裝制作
    4.產品的噴射制作
    5.產品脫模保養
    6.產品包裝運輸

    GRG production process mainly has the following six steps :
    1. computer programmin
    2.Engraving machine engraving mold
    3. Mold assembly production
    4. Production of the product
    5. Product stripping maintenance
    6. Product packaging transport


    一、計算機編程:
            工廠的雕刻師傅根據CAD圖紙,按照客戶的要求和圖紙上面標注的尺寸,進行編寫計算機程序。需要雕刻的一般都是有造型的部位,不能使用平板來實現的部位。

    一、Computer Programming :
           Factory carving master according to CAD drawings, in accordance with the requirements of customers and drawings marked above the size of the preparation of computer programs.Need to carve the general are the shape of the site, can not use the plate to achieve the site.




    二、雕刻機雕刻模具:
            雕刻師把編寫好的程序輸入計算機,三維數控雕刻機就開始自動雕刻模具。一般雕刻的材料主要有木材、石膏、泡沫。

    二、Engraving machine engraving mold :
            he engraver to write a good program into the computer, three-dimensional CNC engraving machine began to automatically engrave the mold.General carving materials are mainly wood, gypsum, foam.



    三、模具組裝制作
             模具制作的基本流程如下:
            1.放線---
            2.開料---
            3.訂底臺---
            4.補灰打模、噴漆---
            5.裝訂---
            6.交QC檢貨。

    三、Mold assembly production
            The basic process of mold making is as follows :

            1.Line
            2.Open material
            3.Set the table
            4.Fill ash mold, paint
            5.Binding
            6.To QC 


    四、模具的種類:
    1.木模---使用次數多,可直接做木負模(使用20-50次)
    2. 硅膠模---造價貴,主要用于雕花,不易脫模(使用20-30次)
    3.玻璃鋼模---使用次數多,造價比木模貴(使用100-200次)
    4.石膏模---使用次數少(使用2-3次)
    5.水泥模

    四、The type of mold:
    1. Wood mold --- the number of use, can be directly made of wood negative mold (using 20-50 times)
    2. Silicone mold --- cost expensive, mainly used for carving, easy stripping (using 20-30 times)
    3. FRP --- the use of more than the cost of wood than your (use 100-200 times)
    4. Gypsum mold --- use less (use 2-3 times)
    5. Cement mold


    五、產品噴射制作:
           GRG的制作工藝主要有兩種,一種是手糊工藝,另外一種是噴射工藝。我司制作的所有的產品,全部是噴射工藝制作。噴射工藝是GRG行業標準指定的制作工藝。噴射工藝制作出來的產品的質量和強度都是手糊工藝的幾倍甚至幾十倍以上。
     噴射工藝的主要步驟如下:
      1.清理模具---
      2.打脫模油---
      3.開料---
      4.噴制---
      5.背部收光---

    五、Product jet production :
           GRG production process there are two, one is hand paste process, the other is the spray process.I produced all the products, all of the spray process production.The spray process is the GRG industry standard designation process.The quality and strength of the products produced by the spray process are several times or even several times more than the hand-paste process.
    The main steps of the spray process are as follows :
      1.Cleaning mold---
      2.Playing off the oil---
      3.Open material---
      4.Sprayed---
      5.Back light---


    六、產品脫模保養:GRG的產品脫模以后保養三天就可以
           產品包裝運輸:出廠的所有的產品,都需要進行良好的包裝。首先用包裝紙來包裝,外部還需要用木卡來進行加固。運輸方式一般有陸運和海運兩種。如果條件和工期允許,首選海上運輸。條件不允許的選擇陸運。
    六、Product stripping maintenance : GRG products can be lifted for three days after stripping
            Product packaging Transport : All the products of the factory need to be well packed.First with wrapping paper to packaging, the external also need to use wood to reinforce.There are two kinds of land transport and sea transport.If conditions and duration allow, preferred sea transport. Conditions are not allowed to choose land transport.

     

    GRG生產工藝流程
    GRG生產工藝流程圖

    ------ 責任編輯:勝帆建材
    ------Editor: Sheng Fan building materials

    版權所有http://www.uvvfgi.live(勝帆建材)轉載請注明出處
    All rights reserved http://www.uvvfgi.live (Sheng Fan building materials) reproduced please indicate the source

  • 勝帆GRG安裝工藝
    Shengfan GRG installation process

     

    一、GRG吊頂安裝
    吊頂安裝主要通過螺桿連接,螺桿不小于8厘米 ,但螺桿連接不宜過高,如果吊頂完成面與樓板高度超過1米,最后另行焊接轉換層轉,換層的高度如果超過2米,就必須做雙層鋼架,鋼架轉換層必須考慮空間跨度,跨度過大的轉換層應加大鋼材型號以降低下垂指標。轉換層做好后最好放置幾天時間,讓鋼材的自然下垂到位后再進行GRG安裝。安裝吊頂GRG時可根據經驗值把吊頂中部的水平適當調到5mm左右,GRG板塊安裝好后由于受力作用鋼架還會再次下降,但系數不大,所以通過提高中部水平來解決。由于GRG的特性易變型,并且彈性比較好,所以安裝好后的GRG板塊之間須用螺絲連接。

    一、GRG ceiling installation
    Ceiling installation mainly through the screw connection, the screw is not less than 8 cm, but the screw connection should not be too high, if the ceiling finish and floor height of more than 1 meter, and finally another welding conversion layer, the height of the layer if more than 2 meters, Double steel frame, steel frame conversion layer must take into account the space span, the span of the conversion layer should be increased to increase the steel model to reduce the sag index.After the conversion layer is best to put a few days after the time, so that the natural sagging steel in place after the GRG installation.When installing the ceiling GRG, the level of the middle part of the ceiling can be adjusted to about 5mm according to the experience value. After the GRG plate is installed, the steel frame will fall again after the steel plate, but the coefficient is not big, so it is solved by raising the middle level.As the GRG characteristics of the variable type, and the elasticity is better, so the installed GRG plate must be connected with a screw.



     

      板塊與板塊的連接圖

    板塊與板塊的連接圖
    Plate and plate connection diagram



    GRG吊頂安裝示意圖

     GRG吊頂安裝示意圖
    GRG ceiling installation diagram



     

    二、墻面安裝(與GRC干掛法安裝一樣)
    二、Wall mounting (same as GRC dry installation)



    三、接縫處理:
           1.嵌縫膏調配:拉法嵌縫石膏+短纖(玻璃纖維)+緩凝劑+水
           2.步驟:安裝縫用嵌縫膏填實(可分兩次填實),然后用玻纖網將接縫處貼好(玻纖網必須用水泡足方可使用),貼完玻纖網后表面用防水膩子批平后方可進入下一表面處理工序。
    三、Seam processing :
           1. Cracked paste deployment: Rafa caulking plaster + staple fiber (glass fiber) + retarder + water
           2. Step: install the seam with caulking paste filled (can be divided into two fill), and then use the fiberglass mesh will be posted at the seam (fiberglass mesh must be used only before the bubble), paste the finished glass After the surface with a waterproof putty approved before entering the next surface treatment process.




    四、GRG表面處理:
          1.乳膠漆
          2.氟碳漆
          3.金箔,銀箔,銅箔
      4.膠衣
    四、GRG Surface Treatment:
           1.Latex paint
           2. Fluorocarbon paint
           3. Gold foil, silver foil, copper foil
           4. gel coat




    五、鋼材計算公式(換算比重)
          1.無縫鋼管:(外徑—壁厚)*壁厚*0.02456
        2.方鋼:周長*壁厚*0.00785
        3.等邊角鐵:(邊寬*2—邊厚)*邊厚*0.00795
        4.不等邊角鐵:(長邊寬+短邊寬—邊厚)*邊厚*0.00795
          5.槽鋼 工字鋼:0.00785*腿厚【高+e(腿寬—腰厚)】
          6.鋼板:7.85*厚度
    五、Calculation formula for steel (conversion ratio)
           1. Seamless steel pipe: (OD - wall thickness) * Wall thickness * 0.02456
           2. Square steel: Perimeter * Wall thickness * 0.00785
           3. equilateral angle: (width * 2 side thick) * side thick * 0.00795
           4. Unequal angle iron: (long side width + short side width - side thick) * side thick * 0.00795
           5. Channel I-beam: 0.00785 * Leg thickness [high + e (leg width - waist thickness]
           6. Steel plate: 7.85 * Thickness


     

    ------ 責任編輯:勝帆建材
    ------Editor: Sheng Fan building materials

    版權所有http://www.uvvfgi.live(勝帆建材)轉載請注明出處
    All rights reserved http://www.uvvfgi.live (Sheng Fan building materials) reproduced please indicate the source

彩票数据分析软件